Interchangeable core mould specialists

Intertech is an expert of making the interchangeable core mold and the replaceable core mold

Intertech is an expert of making the interchangeable core mold and the replaceable core mold 

The purpose of applying this type of the interchangeable core mold and the replaceable core mold is basically to save the mold making cost.  Especially for those products which are with many series but with low volume required, this type of mold is the best solution !

 Professional mold design is the key to the success

For making such interchangeable core mold and the replaceable core mold, mold design is very important.  It needs to have the most optimized mold core distribution for replacing quickly, safely and precisely.

Also, such mold better to be able to interchange, replace on injection molding machine without unloading the mold from the mold. By doing this way can save a lot of injection molding production time and efficiency.

Important points to be noted when choosing to make such type of mold:

1.     Mold engineering job should be professional and experienced enough to consider the mold movement 
   coherence and consistency.

2.     Mold core plate strength should be well considered.

3.     Interchangeable core and the replaceable cores steel should be anti wear

4.     The cores changing and replacing should be with operational manual

5.     The cores should be with components 2d and 3d illustration detail.

Intertech is such an expert of making a lot of successful interchangeable core and replaceable core molds for many of our customers till now.  Welcome to talk to us for any technical support or discussion !